Home Assistant integratio available

[NWT.Stuff]

Thanks Robert @robi

The key was tp present the scripts as you showed in your post:

I did read the manual It’s not very often I thought having the notify reply was a very good idea when testing so I left it like that.

Many thanks for you help and support, Kevin

P.S. I found your documentation/manual well written and easy to follow

[robi]

Updated the component:

• fix for Spotify play/pause toggle
• fix for lovelace media player card artist information
• add support for Home Assistant’s standard multiroom join and unjoin functions
• other general fixes

[Fabio_Pergola]

Guys, is there a way to reboot the device from HA?

i tried this :

but i get :
2021-08-30 12:14:49 WARNING (SyncWorker_1) [custom_components.linkplay.media_player] Player media_player.luidspeker_buiten executed command: Reboot, result: Failed

also tried the HTT¨P API :
http://192.168.0.69/httpapi.asp?command=reboot

but get “unknown command” back

how can we initiate a reboot?

thnx

[robi]

Reboot functionality seems to be removed from the recent firmwares. It was not a real reboot anyway…

[Fabio_Pergola]

Oh, that’s too bad, i had to reboot my device this morning, for some reason it didn’t popup anymore as available device in Spotify…

While other internet radio still worked and app too…
After reboot, it pop-up again in spotify

[NWT.Stuff]

I am thinking of doing something this for each Arylic Device that I have. I already have spare relay contacts in my house so it is straightforward for me

Firmware Upgrade 4.2.9326.26

For a reliable “power cycle off/on” you could use a relay module [RelayModule] There are plenty of Interface Choices too. Wifi RF 433 MHz Hard wired to RPI, Arduino, etc. etc.

[NWT.Stuff]

@robi Robert,

I have some problem to understand the instructions for common sources:-

Is the intention to have the "!include … " instruction in “configuration.yaml” or somewhere else ?

“linkplay-radio-sources.yaml” should be in main “config” directory or “custom_components/linkplay” ?

Many thanks in advance, Kevin

[Fabio_Pergola]

@NWT.Stuff

I am thinking of doing something this for each Arylic Device that I have. I already have spare relay contacts in my house so it is straightforward for me

offcourse, i can also use a smart wifi plug, but then again, extra hardware is needed
it should work with the API, the command is supported, but it doesnt work

[robi]

@NWT.Stuff

I have some problem to understand

Please, why do you put so many screenshots in the forum? You should instead copy the text and paste it here, then select it and apply the preformartted </> code function. Not only it would look nicer, it would also save a lot of resources for everybody (less server capacity, less bandwidth for users with text only instead of pictures containing text). And it would allow others too to copy from the text.

linkplay-radio-sources.yaml should be in the same directory where your yaml configuration is (the same directory where you have the yaml containing media_player defining linkplay devices)

[NWT.Stuff]

@robi

You should instead copy the text and paste it here, then select it and apply the preformartted </> code function

Got it now Sorry new to forums

[NWT.Stuff]

Fabio,

Hopefully @zpl1025 Frank from Arylic can tell us if they are planning to reintroduce “reboot” at some stage.

Regards, Kevin

[zpl1025]

Since you can send the passthrough commands in HA, you could try this one: MCU+PAS+RAKOIT:SYS:REBOOT&

[NWT.Stuff]

Frank @zpl1025 What part of the system does this reboot ?

[zpl1025]

Should be the base board, I need to search in the codes for details anyway

[NWT.Stuff]

@robi This was a game changer. Great Work

So latest “Front End” on Home Assistant

Note all this control can be easily transported to Voice Control (Alexa & Google Assistant) via the Nabu Casa subscription

This is achieved with a mixture of “Scripts” e.g.

"power_off_mini":
  alias: power_off_mini
  sequence:
    - service: linkplay.command
      data:
        entity_id: media_player.075_mini
        command: MCU+POW+OFF

"reboot_mini":
  alias: reboot_mini
  sequence:
    - service: linkplay.command
      data:
        entity_id: media_player.075_mini
        command: MCU+PAS+RAKOIT:SYS:REBOOT&

"mode_wifi_mini":
  alias: mode_wifi_mini
  sequence:
    - service: linkplay.command
      data:
        entity_id: media_player.075_mini
        command: MCU+PLM+000

"mode_bluetooth_mini":
  alias: mode_bluetooth_mini
  sequence:
    - service: linkplay.command
      data:
        entity_id: media_player.075_mini
        command: MCU+PLM+006

The Preset is achieved with a input_number Object:

075_mini_ps:
  name: MINI Preset
  min: 1
  max: 10
  step: 1
  mode: box

And on change of PRESET value will run an “automation”:

# 075 MINI
- alias: "Preset MINI"
  trigger:
    platform: state
    entity_id: input_number.075_mini_ps
  action:
    service: linkplay.command
    data_template:
      entity_id: media_player.075_mini
      command: MCU+PAS+RAKOIT:PST:{{ states('input_number.075_mini_ps') | int }}&

Next Step :- Volume Control.

Thanks for your software @robi works a treat

[zpl1025]

it should reboot the whole device including the base board and the wifi module.

[Beto113]

I know this is a somehow old topic, but the work here is amazing, I try to implement it in the following weeks.

[NWT.Stuff]

Hi @Beto113 Roberto,

Welcome to the Community. There is a lot of people doing interesting stuff here

If you run into any problems or need some help just post here.

Good Luck, Kevin

[chinhhut]

@robi Thank you for making great integration,
By the way, does this integration support A30, SA100 and M400?
Thank you.

[robi]

I don’t know because I don’t have such devices.