Hello. I have 2 Arylic up2stream Amp. 2.1 boards. After the latest firmware update 4.6.415145.44 there are problems: I can program the Main EQ with ACP Workpench and save it to the board, but after a restart the Main EQ is deactivated again. This is the case with both boards. I downloaded the previous fimware from the Arylic Developers site and programmed it using the updateTool.exe via an Ethernet cable. It’s working again now. The Main EQ remains activated. Anyone else have the same problem? Otherwise the new firmware must be revised. Greetings
Yes 4.6.415145.44 is faulty. Thats why I stay with 4.6.415145.35
In my configuration the virtual bass was set to “ON” with 30% intensity after each restart - no matter what I programmed in with ACPW.
1 Like
I got exactly the same issue (dated 19 sept 24) Is there something in the pipe to sort this out?
I got lots of old clients calling me beacause their device is not sounding as before the firmware update. I can’t do anything to fixed the bug and this is a major issue for me
No solution till now for this. You can only tell your customers to block the update server in their routers.
You can also completely deactivate the linkplay board by ripping it off the socket. But you’ll get a Bluetooth-Only box then, without WiFi functionality.
Will the factory reset also remove/default the per channel DSP related settings?
1 Like
Hello,
I’m getting crazy with my device up2stream mini. impossible to increase the volume impossible to update from the App or the browser 
.
If possible to get support please:
{ “uuid”: “FF31F09EC755A0E3BFA8F4E2”, “DeviceName”: “Radio”, “GroupName”: “Radio”, “ssid”: “SoundSystem_13D2”, “language”: “en_us”, “firmware”: “4.6.415156”, “hardware”: “A31”, “build”: “release”, “project”: “Huan_SoundSystem”, “priv_prj”: “Huan_SoundSystem”, “project_build_name”: “a31rakoit”, “Release”: “20220427”, “temp_uuid”: “DC075B12C8A1FC31”, “hideSSID”: “1”, “SSIDStrategy”: “2”, “branch”: “A31_stable_4.6”, “group”: “0”, “wmrm_version”: “4.2”, “internet”: “1”, “MAC”: “00:22:6C:23:13:D2”, “STA_MAC”: “00:22:6C:23:13:D4”, “CountryCode”: “CN”, “CountryRegion”: “1”, “netstat”: “2”, “essid”: “4D6169736F6E446F6D6172696E”, “apcli0”: “192.168.31.53”, “eth2”: “”, “ra0”: “10.10.10.254”, “eth_dhcp”: “1”, “VersionUpdate”: “0”, “NewVer”: “0”, “set_dns_enable”: “1”, “mcu_ver”: “199”, “mcu_ver_new”: “0”
Thank you