Hi!
What about problem, that I couldn’t turn on internet radio after spotify?
My idea is that, You could make 4Streambeta and 4Stream seperatly?
Becouse I use beta outside to connect my all devices for partys with hotspot and normaly at home with Wi-Fi
BR
Sandris
sorry one more problem with hotspot… find yesterday, if make reset to device my phone didn’t find device. Only when I plug out your device and plug in my phone find it.
Could be very good if I could add print screens, because always when connect by hotspot beta version always in finish shoving error that couldn’t connect with my device, but it is connected, I just ignore it.
On Alpha versione have same problem connect together 4 divices, but couldn’t turn on the radio…
could be problem with router speed???
which station you played? And all of them not working? And it’s working before spotify? I’ll check it later anyway.
Still looking for an invitation code?
Very nice that there is such an active community! In the last couple of years I have bought several products with Linkplay A31 boards in it. Now i am trying to update these older modules. When using the update tool, something goes wrong after uploading the firmware. There is a message saying “Firmware size out of range, please burn the all burning version.” The current firmware is 3.6.4715 Can anyone help me understand what I am doing wrong?
The UPnP/DLNA with MusicBee are not working. It’s was working with the old firmware.
/Lyon
Wow, you’re using a31 very early. The reason is the new firmware user different flash layout with the old one. As the tool said, need to use the all burning version, please send me a email for this issue. frank@arylic.com
Will check, it supposed to be no problem
Hi,
EQ settings made with ACW are indeed every time lost!
when turning power off or standby.
Is there a link to the latest non-beta firmware?
Did you download to the board when changed?
You can go to arylic youtube channel to find a tutorial for ACPWorkben.
also i see
Eq settings sometimes resume after couple of seconds. but with new firmware i am not able to bring my device to ON mode from Standby mode from Remote. Device switches on from the Reset button only. With Remote it goes to stand by mode but doesnt comes out of it.
Frank, Joy
Post update, now my Device - s50pro+ is not connecting to internet at all. I tried both LAN and WLAN connections.
It starts but doesnot connects at all.
Please advise what should i do?
It works in Bluetooth and Aux mode but it doenst looks for Internet at all.
Earlier on start a message used to appear “Connecting to Internet”.
Now this doesn’t come at all.
This has happened post Beta Firmware update on the S50 Pro +
Also, Device doesnt switches on ( from Standby Mode) from Remote Power button
Please advise at the earliest.
I can not use this device any more.
Regards
Sarab
The new way of selecting which speakers to use for multiroom is a big improvement! With the chips running as a master, I saw there is an update to 4.2.9227 for my A28 based system. Will there be an update for the A31 as well?
Hi Joy, Frank
Is there a way to update the software apart from WIFI. Like via bluetooth or LAN or USB?
Hi, I recently got my A50+ and I would like to participate in testflight on iPhone 12 Pro, iOS ver 14.XX testing beta.
Can I get and invitation email for the same?
Frank, found a bug in ithis firmware.
When playing MP3 files from USB stick plugged in the device, pause seems to also mute the device, and resume doesn’t unmute it.
Paused with: setPlayerCmd:pause - works
Resumed with: setPlayerCmd:resume - resumes, but need to adjust volume.
Paused with MCU+PLY+PUS - pausing, result is AXX+PLY+000.
Resuming with MCU+PLY+PUS - resumes playback the result is AXX+PLY+001, but need to adjust volume to actually get the sound.
Same with MCU+PAS+RAKOIT:POP&.
Note that getPlayerStatus does NOT return "vol":"0" or "mute":"1" so the user thinks that the player doesn’t resume.
This is with firmware 4.6.9724.26 on Up2Stream_AMP3.
Firmware 4.6.9724.5 on S50 doesn’t have this!
I am new to the Arylic forum and also anew owner of A50+, I would like to get an invitation to testflight iOS newest beta firmware, Could you please help me to set it up?
The UPnP/DLNA are working whit the foorbar2000, but the MusicBee can se the UPnP but it can’t play on it. I have tried to fabric reset the box. It did’t help. 
Logs: the S10 have the ip 192.168.1.173
1; 1 Initialise - 28-08-2021 14:23:08
86; 2 GetNetworkAddresses - 172.25.192.1,dns=True,name=vEthernet (Default Switch),speed=10000000000
87; 3 GetNetworkAddresses - 192.168.1.23,dns=True,name=Ethernet,speed=1000000000
87; 4 GetNetworkAddresses - 169.254.187.235,dns=False,name=Npcap Loopback Adapter,speed=1215752192
88; 5 GetNetworkAddresses - 127.0.0.1,dns=False,name=Loopback Pseudo-Interface 1,speed=1073741824
88; 6 GetNetworkAddresses - http://172.25.192.1:49382
103; 7 ProcessMessage 192.168.1.73 - device ‘uuid:FF31F09E-DA7A-FAFB-EFC9-1783FF31F09E:Arylic S10’,valid=True
106; 8 Profile - Generic Device, useragent=|Linux/2.6.36+
107; 9 Profile - Generic Device, useragent=|Linux/2.6.36+
128; 10 Activate - Arylic S10:http-get::audio/wav:DLNA.ORG_PN=LPCM,http-get::audio/x-wav:DLNA.ORG_PN=LPCM,http-get::audio/mpeg:DLNA.ORG_PN=MP3,http-get::audio/mpeg:DLNA.ORG_PN=MP3X,http-get::audio/x-ms-wma:DLNA.ORG_PN=WMABASE,http-get::audio/x-ms-wma:DLNA.ORG_PN=WMAFULL,http-get::audio/x-ms-wma:DLNA.ORG_PN=WMAPRO,http-get::audio/mpeg:DLNA.ORG_PN=MP2_MPS,http-get::audio/mp3:,http-get::audio/wma:,http-get::audio/mpeg:,http-get::audio/vnd.dlna.adts:DLNA.ORG_PN=AAC_ADTS,http-get::audio/vnd.dlna.adts:DLNA.ORG_PN=AAC_ADTS_320,http-get::audio/m4a:DLNA.ORG_PN=AAC_ISO,http-get::audio/aac:DLNA.ORG_PN=AAC_ISO,http-get::audio/ac3:DLNA.ORG_PN=AC3,http-get::audio/ogg:,http-get::audio/ape:,http-get::audio/x-ape:,http-get::audio/flac:*
1925; 11 Profile - Generic Device, useragent=Linux/3.10.108, UPnP/1.0, Portable SDK for UPnP devices/1.12.1
4562; 12 Profile - Generic Device, useragent=PlexMediaServer/1.24.0.4916-ce9f9dc95
7211; 13 Activate - Arylic S10:http-get::audio/wav:DLNA.ORG_PN=LPCM,http-get::audio/x-wav:DLNA.ORG_PN=LPCM,http-get::audio/mpeg:DLNA.ORG_PN=MP3,http-get::audio/mpeg:DLNA.ORG_PN=MP3X,http-get::audio/x-ms-wma:DLNA.ORG_PN=WMABASE,http-get::audio/x-ms-wma:DLNA.ORG_PN=WMAFULL,http-get::audio/x-ms-wma:DLNA.ORG_PN=WMAPRO,http-get::audio/mpeg:DLNA.ORG_PN=MP2_MPS,http-get::audio/mp3:,http-get::audio/wma:,http-get::audio/mpeg:,http-get::audio/vnd.dlna.adts:DLNA.ORG_PN=AAC_ADTS,http-get::audio/vnd.dlna.adts:DLNA.ORG_PN=AAC_ADTS_320,http-get::audio/m4a:DLNA.ORG_PN=AAC_ISO,http-get::audio/aac:DLNA.ORG_PN=AAC_ISO,http-get::audio/ac3:DLNA.ORG_PN=AC3,http-get::audio/ogg:,http-get::audio/ape:,http-get::audio/x-ape:,http-get::audio/flac:*
9510; 14 Play - \DISKSTATION\music\The Beach Boys\20 Good Vibrations\01 - The Beach Boys - Surfin’ Safari.mp3 (http://172.25.192.1:49382/encode/F10FBD56B903426B-2147483646.wav)
9659; 15 StateTimer - Loading,old=Stopped
249150; 16 Profile - Generic Device, useragent=
552295; 17 Profile - Generic Device, useragent=
863171; 18 Profile - Generic Device, useragent=
1177319; 19 Profile - Generic Device, useragent=
1486285; 20 Profile - Generic Device, useragent=
1791937; 21 Profile - Generic Device, useragent=Linux/3.10.108, UPnP/1.0, Portable SDK for UPnP devices/1.12.1
1799096; 22 Profile - Generic Device, useragent=
2101111; 23 Profile - Generic Device, useragent=
2406107; 24 Profile - Generic Device, useragent=
2715043; 25 Profile - Generic Device, useragent=
3032303; 26 Profile - Generic Device, useragent=
3338045; 27 Profile - Generic Device, useragent=
3581938; 28 Profile - Generic Device, useragent=Linux/3.10.108, UPnP/1.0, Portable SDK for UPnP devices/1.12.1
3641080; 29 Profile - Generic Device, useragent=
3944146; 30 Profile - Generic Device, useragent=
4252256; 31 Profile - Generic Device, useragent=
4568455; 32 Profile - Generic Device, useragent=
4874538; 33 Profile - Generic Device, useragent=
5148467; 34 StateTimer - Stopped,old=Loading
5149123; 35 Play - \DISKSTATION\music\The Beach Boys\20 Good Vibrations\02 - The Beach Boys - Surfin’ U.S.A…mp3 (http://172.25.192.1:49382/encode/6E6E2572F3D9AC4F-2147483643.wav)
5149303; 36 StateTimer - Loading,old=Stopped
5155346; 37 StateTimer - Stopped,old=Loading
5155838; 38 Play - \DISKSTATION\music\The Beach Boys\20 Good Vibrations\03 - The Beach Boys - Surfer Girl.mp3 (http://172.25.192.1:49382/encode/AB33187DCE6BC8E0-2147483640.wav)
5156005; 39 StateTimer - Loading,old=Stopped
5168612; 40 StateTimer - Playing,old=Loading
5176588; 41 Profile - Generic Device, useragent=
5371939; 42 Profile - Generic Device, useragent=Linux/3.10.108, UPnP/1.0, Portable SDK for UPnP devices/1.12.1
5492885; 43 Profile - Generic Device, useragent=
5809168; 44 Profile - Generic Device, useragent=
5986299; 45 StateTimer - Stopped,old=Playing
5987197; 46 Play - \DISKSTATION\music\The Beach Boys\20 Good Vibrations\04 - The Beach Boys - Little Deuce Coupe.mp3 (http://172.25.192.1:49382/encode/C3D80D7D5D906280-2147483637.wav)
5987348; 47 StateTimer - Loading,old=Stopped
6116497; 48 Profile - Generic Device, useragent=
6353988; 49 StateTimer - Playing,old=Loading
6430738; 50 Profile - Generic Device, useragent=
6737711; 51 Profile - Generic Device, useragent=
7044837; 52 Profile - Generic Device, useragent=
7161941; 53 Profile - Generic Device, useragent=Linux/3.10.108, UPnP/1.0, Portable SDK for UPnP devices/1.12.1
7344900; 54 Profile - Generic Device, useragent=
7645917; 55 Profile - Generic Device, useragent=
I’m tempted to try this as I might remove my mini V3s from speaker cabinets and build into amp with source selection…
Is there a way to backup my current firmware incase I have issues?